BIA-60 Pump

The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.


The pump is characterised by:

  • Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.

  • Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.

  • Run dry protection to prevent pump damage

  • Automatic electronic control has in-built check valve to prevent water backflow through the pump.

  • 2.2bar pump cut in for greater versatility.

  • Corrosion resistant pump body, diffuser and impeller to ensure pump durability

  • High quality mechanical shaft seal and high quality bearings

  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.


  • Used especially for supplying water to domestic installations and applications where a suction lift is required.

Package Information

  • 11 KG

  • L 420mm x W 230mm x H 460mm


Maximum ambient temperature: 40oC
Maximum operating pressure: 6 bar
Pipe connections suction/discharge: 1” BSPF / 1” BSPM
Dimensions: 420mm L x 460mm H x 230mm W

Electrical Data

Rated voltage: 220 (-6%) -240V (+6%)
Mains frequency: 50 Hz
P2 (kW): 0.6 (Shaft Power)
Current: 4 amps
Capacitor: 16 uF
Motor duty: Continuous
Motor type: Asynchronous, TEFC
Motor protection: In-built thermal overload
Ingress protection: IP X4
Insulation class: F
Net weight: 11 kg


Liquid Type: Clean Water
Clean water temperature range: 2 – 40oC


Pump body: Stainless Steel 304
Impeller: Jet/Venturi
Diffuser: Noryl Glass Reinforced
Mechanical seal: Carbon/Ceramic/Nitrile
O rings: Nitrile
Power Cable: 2m Cable H05 3G1.0

Related products